Wallpaper paving for decoration and literacy

2022-07-22
  • Detail

Wallpaper gives people a warm and soft texture, and the pattern of wallpaper has various colors, which is the favorite choice of many owners. However, the laying and pasting of wallpaper has high requirements for technology, which requires professional workers to construct. If it is not pasted well, it will have a great impact on the later effect. Some owners choose to stick wallpaper by themselves, and some owners do not need to stick wallpaper by themselves, but it is best to understand how to stick wallpaper correctly and how to stick wallpaper in a standardized way, so as to supervise and grasp the construction of workers

the meaning of wallpaper tiling

wallpaper gives people a warm and soft texture, and the wallpaper pattern is colorful, which is the favorite choice of many owners. However, the tiling of wallpaper has high requirements for technology, and professional workers are needed to construct it. If the tiling is not good, it will have a great impact on the later effect. Some owners choose to stick wallpaper by themselves, and some owners do not need to stick wallpaper by themselves, but it is best to understand how to stick wallpaper correctly and how to stick wallpaper in a standardized way, so as to supervise and grasp the construction of workers

wallpaper paving process

I. wall treatment

1 Shovel the wall

for old painted walls, shovel the wall first, especially those with shells; Because the paint applied to the new house is very thin, it is only necessary to directly approve the wall

2. Batch wall

there are more or less uneven places on the wall surface that has been shoveled off the wall surface, or on the wall surface of a new house, so according to the specific situation of the wall surface, it can be partially repaired, or it can be batch once in a large area, so that the wall surface looks very flat as a whole

3. Polish

the wall is approved and dried for a day or two. After it is completely dry, it is necessary to polish it with sand skin. Grinding the wall can smooth the small particles, concave and convex surfaces produced by the batch wall. The above three small steps are also necessary for painting

II. Brush the base film (or varnish)

the function of the base film and varnish is to make the wall form a solid protective layer, so as to ensure that the wall will not be damaged when changing wallpaper next time, and also play the role of waterproof and mildew. Relatively speaking, the base film is tasteless and environmentally friendly, which is not harmful to the body; Varnish can make the surface of the wall stronger and have better effect, but the varnish has a great smell and contains toxic substances, which will cause great damage to the body if inhaled too much

III. check the wallpaper

after the wall is treated, you need to wait one to two days, and then stick the wallpaper when the wall is dry

IV. make glue

it's still a large basin, a roller, a new cloth, a ruler, a sharp art knife, and preferably a scraper (soft). Prepare these materials before you can make glue

v. cutting wallpaper

before cutting wallpaper, you should measure the height of the wall, and also check whether the pattern of the wallpaper is large. If you want to align the flowers, you should generally set aside how much size, and determine the length of each wallpaper. Then cut the wallpaper in order according to the volume number of the previously sorted wallpaper. Each cut wallpaper should also be placed in order, especially not disorderly, so that the previous sorting work is in vain, and the wallpaper will be prone to color difference problems. Generally, you can only cut 3 rolls of wallpaper first, and try to paste it without chromatic aberration. Because the wallpaper has obvious color difference, the manufacturer can only pay 3 rolls at most

VI. glue wallpaper decoration

find a table, take the wallpaper to be pasted in order, spread it on the table, and apply glue with a roller one by one. The wallpaper painted with glue can be folded and placed. When folding, the side with glue faces the side with glue and the surface faces the surface. Try to avoid glue getting on the surface of the wallpaper. All wallpaper painted with glue should also be placed in order to ensure the correct order

VII. Wallpaper decoration and paving

wait 2-3 hours after the wallpaper is coated with glue to ensure that the glue fully penetrates the bottom layer of the wallpaper. When pasting, first take the wallpaper with good glue, then the next one with good glue, and so on

VIII. Wallpaper decoration is completed.

after three rolls of paper are pasted, generally one wall can be completed. You can stand directly in front of the wall and look at the left and right sides to see if there is any light color difference, mosaic problem, other defects, etc. If there is no problem, then continue to cut other wallpapers in order, apply glue, and put on the wall

precautions for wallpaper paving

1 The wall surface shall be treated before the wallpaper is pasted, putty powder shall be applied, varnish or base film shall be applied, and the wallpaper shall be pasted after it is completely dry. To brush the base film, first prepare a large washbasin, a roller and a paint brush. Pour the base film into the basin, add appropriate clean water according to the instructions, adjust it to the appropriate concentration, and then you can start painting with a roller in a large area, and brush the corners individually with a paint brush, so as to ensure that each corner is painted with the base film; If varnish is used, pour an appropriate amount of varnish into the basin, add banana water to dilute it, adjust it to the appropriate concentration, and brush the wall as above. However, before painting varnish, if the floor has been paved, it is best to lay some newspapers around the floor near the wall, so as to prevent the varnish from polluting the floor, which will be difficult to remove

2. During the inspection of wallpaper, you can check the wallpaper you bought to see if there are any accidents. First look at the color and pattern, whether it is the wallpaper you ordered, and then look at the model and batch number of each roll of wallpaper, whether it is a batch number, to ensure that there is basically no color difference. Then check whether there is a volume number (some manufacturers do not have a volume number). If there is a volume number, arrange the wallpaper in order according to the volume number, because the color difference between the wallpapers will be the least if the volume number is the most adjacent. If you order a lot of wallpapers of the same type, sort them by the case number first, and then arrange the roll number

3. Dry pasting method is adopted when pasting wallpaper, and blister wallpaper is not allowed

4. When preparing glue, take the wall powder and pour it into the basin. Slowly add water and make it into rice flour paste. You can wait a little for half an hour, because the wall powder will slowly expand when absorbing water. If it is found to be too dry, continue to add water. It's best to leave a part of the wall powder when pouring it, because in case the glue is diluted, you can add a little more wall powder. Finally, the adjusted glue can be vertically inserted into the basin with a chopstick. If it is not poured out immediately, it means that the concentration is OK. Then add the bought wall glue and mix well to increase the viscosity of the glue

5. The first wallpaper is easy to paste, but it is also the most important one, so it must be vertical. It is suggested to snap a vertical line on the wall with a vertical weight in advance for reference. When pasting, make sure that the position of the wallpaper has been fixed, then start from the top of the wallpaper, use a towel or scraper to squeeze out the excess glue from the middle of the wallpaper to both sides, or from top to bottom, (if the surface of the wallpaper is fluffy, you can only squeeze the glue down, because in case the glue gets to the fluffy surface of the wallpaper, it will not be wiped off, and a white mark will be formed)

at the beginning of the second picture, it is necessary to consider the opposite flowers when pasting (some with simple colors or patterns do not need the opposite flowers), so the second picture must first try how to spell it before it can be well spliced with the first one. After the pattern is aligned, it is necessary to check whether the seam between the second piece of paper and the first piece of paper is just spliced together. Too large and large the seam will affect the overall effect. Therefore, generally, we will first try to align and sew the wallpaper with a length of about 1 meter on the top, and then squeeze out the excess glue with a scraper or towel to fix the top, and then start pasting the bottom. After one is pasted, stand a little farther away to see if there is any color difference, whether there is any problem with the mosaic, etc. if there is no problem, you can paste the third one, and so on

what the owner needs to pay attention to in this step

1 During construction, do not open doors and windows, air conditioning, and ventilation after the wallpaper is completely dry 2-4 days after the completion of construction

2. The wall surface shall be painted with varnish, and the varnish shall be dried for about 2 days. Pay attention to ventilation, and then paste wallpaper after dispersing the smell of varnish

3. Non woven paper after gluing, fold it up and let it stand for 5-10 minutes

4. Sophia, Raphael, Evan and other fiber paper should have higher viscosity of rubber powder

5. American glue is not suitable for fiber paper. The drying speed of glue is too fast to stick to wallpaper

贵阳男科医院

北京皮肤病医院

杭州耳鼻喉医院

北京男科医院

Copyright © 2011 JIN SHI